44947 Exposure Head Interface EHI: Laser drive current limit Gravure Japanese_Newspaper_OEM_Engine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 The output laser current is more than 5A lower than the setpoint commanded by the HC board. This could be caused by a current setpoint that is too high. The head will recover automatically if the current is lowered. This error will also be reported if there is a problem with the laser diode leads or contacts. This error code applies to Thermal Head firmware version 1.34 and above. Try lowering laser power. Call service. This error is reported. The current setpoint is too high. Could be problems with the laser diode leads or contacts. 03-Jul-2002 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:42 2008 PST